Useful device of the Week: 3.5mm Jack plug to CAT5 Adaptors for IR Extender

If you requirement to prolong your difficult wired IR distribution system over CAT5 here’s a truly helpful set of adaptors.  The Keene electronics 3.5mm jack plug to CAT5 adaptors for IR extenders are under £6 as well as enable you to quickly link your IR transmitters as well as receivers to any type of CAT5 outlet with a patch lead…

A set of two short (25cm) line adaptors, one with an RJ45 line socket to a 3.5mm stereo jack plug, as well as the other with an RJ45 line socket to a 3.5mm stereo jack socket.

This is developed to enable CAT5 cable television to be utilized to prolong the distance between the IR receivers as well as the Keene IRBKIT as well as IR commander infra red distribution systems.

To utilize just plug the IR receiver in to the 3.5mm jack socket of one adaptor as well as the 3.5mm plug of the other adaptor goes into the IR receiver input of your IRBKIT or IR Commander. link your Cat5/6 (standard wired network cable) in between the adaptors as well as that is it. utilizing this technique it is possible to remote install IR receivers at distances of as much as 100m.

Available from Amazon

4 Reviews

3.5mm Stereo Jack Plug/Socket To feline Adaptors For IR cable television extension KA175
prolong either the Receiver or Emitters
Extend as much as 100m
3.5mm stereo jack (will work with Mono signals)


purchase on Amazon

Keene IR Distribution  :  Previous Gadgets of the Week

Share this:




Last update on 2021-10-04 / affiliate links / pictures from Amazon product marketing API

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Post